硬件放电过流保护-Hardware discharge overcurrent protection

硬件放电过流保护为前端检测芯片检测到电流大于硬件放电过流保护值时，保护板关断放电开关，停止放电，一般硬件过流值为额定电流的3-5倍

The hardware discharge overcurrent protection is when the front-end detection chip detects that the current is greater than the hardware discharge over-current protection value, the BMS turns off the discharge switch, stops the discharge, and the general hardware over-current value is 3-5 times of the rated current.